Diesel Screw Compressor 160 CFM

Diesel Screw Compressor 160 CFM

80CFM, 130 PSI Diesel Screw Compressor

Availability: In stock
SKU
DSC080C
  • 80 CFM or 2.27 m3 per minute
  • 130 psi / 9 bar / 896 kpa 
  • 42 Litre Fuel Tank
  • Minesite Bunded Base Fuel Tank
  • Reliable Time-proven OEM 3 Cylinder Water Cooled Diesel Engine
  • Tough-built Weatherproof Canopy
  • Forkliftable Skid Design with Top Lift Option for Versatile Use
$10,500.00

If you are a residential house or dwelling but you want to pick it up from the shipping depot yourself please choose industrial / commercial premises.

Specification

Put simply, our screw air compressors are built to last. ABLE 80 CFM diesel screw air compressor is engineered to withstand Australia’s climatic conditions. Built with a weather-resistant covered canopy and a forkliftable skid design with a top lift option makes this unit easy to transport. 

Powered by a reliable time-proven OEM 3 Cylinder Diesel engine and with a 42-litre fuel tank, this air compressor is sure to give you enough air power to finish even the most rugged jobs!

 

Key Features:

  • 80 CFM or 2.27 m3 per minute
  • 130 psi / 9 bar / 896 kpa 
  • 42 Litre Fuel Tank
  • Minesite Bunded Base Fuel Tank
  • Reliable Time-proven OEM 3 Cylinder Water Cooled Diesel Engine
  • Tough-built Weatherproof Canopy
  • Forkliftable Skid Design with Top Lift Option for Versatile Use
  •  

Free Air Delivery :

80 cfm / 2.27 m3 per min

Working Pressure :

130 psi  / 9 bar / 896kpa

Engine :

OEM 3 Cylinder Diesel

RPM :

1,700 - 2,200 rpm

Cooling Method :

Water Cooled - Rated For Australian Summers

Rated Power kW / RPM : 

25 kW / 2,600 rpm

Injection :

Direct

Aspiration :

Natural

Controller :

Digital Multi-functional Meter

 

Engine Speed

 

Oil Pressure

 

Oil & Water Temperature

 

Battery Voltage

 

Run Hours

Safety Systems :

Emergency Stop Switch

Noise Level :

75 dBA at 7 metres (75% Load)

Fuel Tank Capacity :

42 Litres (Bunded Tank)

Running Time :

10 hours (75% load)

Fuel Consumption :

3.9 Litres per Hour (75% load)

Chassis Enclosure :

Weather-Resistant Powder Coating

 

Canopy Opening for Convenient Servicing

 

Forkliftable for Versatile Use

 

Canopy Built for External Use

Mine Site Ready Bunding :

YES

Air Outlet :

2 x 3/4 Inch Ball Valves with BSP Fittings

Weight (kg) :

730 kg

Dimensions (LxWxH) :

155 x 73 x 106 cm (LxWxH)

 

Description

Rotary screw compressors provide an extremely reliable supply of clean, dry compressed air.

When deciding between rotary and piston compressors, it is important to consider duty cycle, performance, energy efficiency, air quality, maintenance, and installation costs.

Piston compressors are still the most common choice for many small compressed air system users.

For many of these applications, the relatively low air demand and quality are needed to make the piston a cost-effective choice.

There is, however, a segment of compressed air users that may require a higher level of air quality. A collision repair shop, for example, would typically use much more compressed air and have higher air quality needs than other automotive service businesses.

Duty Cycle and Flow

An important difference between a piston and rotary compressors is their duty cycle.

Duty cycle is the percentage of time a compressor may operate without the risk of overheating and causing excessive wear.

A piston compressor may provide adequate flow for a short period, but its allowable duty cycle must be considered. Most small piston compressors have an allowable duty cycle of 60-70%. For this reason, piston compressors are usually oversized to allow the compressor to periodically shut down and cool off because of the relatively high operating temperatures.

Even with adequate air storage, this can cause capacity problems during peak operating hours. Further, if the shop expands or business increases, lack of air capacity can become even more of an issue.

Rotary screw compressors have a 100% allowable duty cycle and operate continuously if the need arises. This is possible because rotary compressors are fluid-cooled. The fluid performs four important functions:

  • Lubricates the bearings in the pump
  • Removes contaminants from the air
  • Forms a non-wearing seal between rotors and casing
  • Removes the heat generated by compression as part of a thermostatically controlled fluid circuit.

Heat and Moisture

All of these benefits are important, but this last point is very relevant to air quality. Piston compressors operate at internal temperatures of 300°F - 400°F, while a rotary screw compressor runs at much lower internal temperatures (between 170°F and 200°F). Just as hot summer air holds more humidity, hotter compressed air can hold more moisture and requires additional components to dry and clean it. A rule of thumb is that every 20 degrees (F) increase in temperature doubles the air’s ability to hold moisture.

Diesel Screw Compressor

The advantage of a diesel screw compressor is reducing the dependency on an electrical power source, and, the ability to be mobile.

The ABLE diesel screw compressor can be moved between locations much the same way as our ABLE diesel generators using a forklift, HIAB, tilt tray, telehandler, or sling for example.

Being a mobile unit makes the diesel screw compressor perfect for service vehicle applications on-farm, mine, and building sites. 

 

Warranty

The warranty is for 12 months or 1000 hours.

Batteries are not included in our warranty.

We warrant our products for faulty parts and defective workmanship.

This warranty does not cover misuse, incorrect or irregular maintenance, and accidents during use.

If a product or part is faulty, we require it to be sent back to us including a copy of the Tax Invoice.

Once the item or part is tested and is faulty, it will be repaired or replaced under warranty.

The purchaser is responsible for all postage costs of returning any faulty item back to us and is also responsible for the postage costs incurred when we send the replacement part back to the purchaser.

 

Write Your Own Review
You're reviewing:80CFM, 130 PSI Diesel Screw Compressor
Your Rating