Alternator Output | 27KVA 415 Volt |
Voltage Regulation | Automatic Voltage Regulation |
Power Factor : | choose 1.0 or 0.8 |
Phase Voltage : | 415 volt Four wire |
Frequency : | 50 Hertz @ 1500 rpm |
RPM : | 1500/min |
Mounting | Close Coupled Flex plate SAE 4/5 Eight Bolt pattern |
Insulation | Class "H" |
IP Rating | IP 23 |
Excitation | Self Excitated |
Winding Leads | 12 Wire 415volt configuration |
Weight |
156kgs
|
Dimensions |
84 x 59 x 75 ( LWH)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Alternator is ideal for upgrading your generator with a brand new alternator instead of rewinding.
This alternator is 1500 RPM 50HZ 415 Volt unit. It can be wired by an electrician for 240 volt output as well.
The windings are high quality copper windings with Class H Insulation, that means you will get quality power output close to mains quality.
The output is pure sine wave with a less than 2% @ 100 % load for THD
The alternator design is based on the UC Type Stamford Alternator and is fitted with an Automatic Voltage Regulator. This is gives the operator a constant and stable voltage output.
We carry a range of Single and Two bearing alternators for replacement or assembling your own generator.
Please email us for further information for your queries
The warranty is for 12 months or 1000 hours.
We warrant our products for faulty parts and defective workmanship.
This warranty does not cover misuse, incorrect or irregular maintenance and accidents during use.
If a product or part is faulty, we require it to be sent back to us including a copy of the Tax Invoice.
Once the item or part is tested and is faulty, it will be repaired or replaced under warranty.
The purchaser is responsible for all postage costs of returning any faulty item back to us and is also responsible for the postage costs incurred when we send the replacement part back to the purchaser.
This item must be installed by a qualified electrician.